Product Description
Starboosa All Aluminum Frame – Mount Camera Adapter
Specifications：
The advantage is that it can be viewed from both a first-person perspective and a third-person perspective.Smartphone can be adjusted 360 degrees on the side to suit your viewing Angle.Adapters are suitable for almost all eyepieces, including simple rifle scope eyepieces, eyepieces with knobs, curved eyepieces, and even eyepieces with small rings and handles.It is made of an aluminum frame with an anodized surface.Tips: For smartphones with multiple cameras, it can also be used to install it.It is important to choose the correct main camera as the mounting alignment.
Smartphone can be adjusted 360 degrees on the side to suit your viewing Angle.
It can be viewed from both a a third-person perspective.Smartphone can be adjusted 360 degrees on the side.
It can be viewed from both a a third-person perspective.Smartphone can be adjusted 360 degrees on the side.
It can be viewed from both a first-person perspective.
Installation reference; For details, see the product manual.
Step1
Tip: The first step to receive the goods is to open the spring phone holder
and loosen the 6 screws.
Step2
Try to line up the phone’s camera and side holes in the center.
For details: Loosen screw,and turn on the mobile phone camera.
Step3
Pull the bottom spring phone clip so that the clip opens. After opening the clip,
Insert the smartphone into the open phone clip,
and the spring phone clip will automatically hold the phone in place.
Tip: Make sure the buttons on the side of the phone are not pinched.
Package included:
1x Aluminum Frame – Mount Camera Adapter
Advantages
Advantages:
The advantage is that it can be viewed from both a first-person perspective and a third-person perspective.
You can use your phone’s camera to record video by looking at the scope in the side direction, and you can also use your eyes to look at the scope eyepiece. Smartphone camera adapter allows your phone to connect to the rifle/airsoft scope eyepiece, allowing you to easily take photos and videos with your phone. It is suitable for the mainstream eyepiece exit pupil distance in the market; After testing, most of the eyepiece exit pupil distance is suitable for installation. Simple connection to the smart phone, just to pull open the installation clip;After installation, it is stable and firm, and there is no need to worry about the phone being scratched or damaged.
Product display
Display 1
When the goods are just received, the thread is locked and the bottom clip is closed.
Display 2
Then the state is to loosen the 6 screws and open the bottom clip.
Display 3
Bottom clip open by hand stretch.
Display 4
Adjust with the mobile phone to align the center of the camera.
All Aluminum Frame Version that can be viewed from two viewpoints at the same time.You can use the phone camera to observe the scope in a 90-degree direction, or you can use the scope eyepiece to aim.
The mount is suitable for almost all eyepieces with an outer diameter of 36mm-46mm, including eyepieces with simple rifle scopes, eyepieces with knobs, curved eyepieces, and even eyepieces with small rings and handles. Two angles can be used at the same time, the first-person perspective can be used to observe and aim, and the 90-degree third-person perspective can also be used to observe.
It is made of durable aluminum and well anodized. The screws connecting the eyepieces are made of nylon plastic, which can effectively prevent scratches on the surface of the eyepieces. The fixing method of multiple screws makes the stability better.
The smartphone camera adapter can be connected to the rifle scope, allowing you to easily take photos and videos with your phone, and it is suitable for all exit pupil distances. And share photos and videos with family and friends.
It can be applied to various smart phones with a width of 54mm-104mm. For example, iphone 5, 5s, 6, 6s, etc.Surface of the connected smartphone is covered with a soft material. No need to worry about the phone being scratched or damaged.
Customers say
Customers find the telescope mount to be well-made. However, the camera size receives negative feedback, with one customer noting the screen is very small. Moreover, the functionality is problematic, with several customers reporting that it doesn’t work. Additionally, customers find it difficult to access.
Amazon Customer –
Seems good ?
Haven’t used it yet , but looks like it should work good ?
TRACY –
Not As Good As Advertised
I had high hopes for this product, but it barely delivers. I tried two different cell phones (iPhone SE and 11) with the scope adapter on four different scoped rifles. The adapter did not fit well, or stay on, or align with any of my standard scopes (Leopold, Vortex and Tasco brands). There is too much of a gap on the scopes and at the phone camera lens to the adapter housing and the light leaking in causes viewing probelms. And the POV image thru the scope on the camera screen is very small. If you are trying to film what you are attempting to shoot, this product is not the answer. Just being honest.
van trammell –
sturdy but need some work.
the screws to mount it on the scope could be way better. i understand the use of using plastic screws but a beefier single knob screw would have worked way better, especially it it had three plates instead of just screw heads. adjusting it seems easy but that was the most complicated thing about it.if your phone has a case, youll need to take that off to get the camera as close to the viewfinder as possible. the knurled nut that adjusts the phone angle should be bigger and the nut on the back is really hard to get to and needs a bigger knob to tighten it easier. once all that is done then you have to adjust your zoom on your phone because the image in the periscope isnt 1 to 1. its smaller so that needs to happen or a 2 x magnifier should be in the diopter. Im going to see if i can take a dremel and cut a 1.25x lens from a pair of reading glasses to get that accomplished. ill let you all know.
Juan carlos Zúniga picazo –
Bueno pero le falta un soporte mas bueno
Funciona bien el detaye es que con el retoseso de mi rifle de aire se muebe mucho y tengo que ajustarlo denuevo
Jennifer silva –
best mount i have found
this adapter works fantastic and is well made so much sturdier than any of the plastic i tried in the past and at a very nice price it well; worth what they are asking for it and yes if you want to mount your Binoculars on a tri pod i would buy this one
Carlos P. –
Lo que siempre he soñado a un bajo costo
Solo necesitas una buena cámara
Ft. Lauderdale Warm –
Just didn’t work on a rifle scope
I so wanted this to work on my rifle scope but the eye relief / field of view became so small when I installed the phone mount that I could not use it. Even the view through my iPhone 13 was not aligned properly. It is the right idea and the quality of the product seems to be OK, it just doesn’t work.
Starman –
Well made but perhaps for lower powered scopes
Right… So I didn’t get this camera adapter for my rifle, I was hoping to use it with my telescope instead.The camera adapter seems very sturdy and well made. The attachment areas are tight fitting and it appears a lot of thought went into the design and manufacturing.I thought I would like the spring loaded part of the adapter that holds the phone to the adapter but I think now, I would rather have had the other model that they sell that has knobs you turn to secure the phone in place. I’m not saying they aren’t tight enough to hold the phone securely, it seems it does that ok, but it is harder to hold the clamps apart with your hands, and then try to place your phone in position. It can be done ok, I just think, I myself would prefer knobs instead. (I think it would be easier to open it up wide enough to place the phone on the attachment plate, hold them both in place with one hand while tightening it up with the other hand)I am using the pixel phone, and for some reason the camera lens area on the pixel sticks up from the back of the phone ~1/16″. So for the camera adapter to work properly and maintain the orthogonality of the optic path I added a spacer to compensate. (Fortunately the camera adapter had enough threading on the attachment/alignment pivot point to allow for the spacer. So far so good, I now had the phone mounted on the camera adapter and could see the alignment was where it needed to be, and see an image through the viewing port. Adjusting the adapter to fit the phone seemed easy enough, I think the flexibility is enough for all phones. It seemed to me things were going to work out fine.Nope… It didn’t. There was no way I could get any decent image to show through well enough to get a picture. The view was like looking through a tube. Well in essence that is what was happening, just looking through a tube. Once zoomed in enough to see an image the vignetting was so great, there just wasn’t enough image to call it picture worthy.I tried to attach it to my binoculars. It did attach ok but… I felt like, “as my wife put it”, ridiculous trying to hold it in a way to achieve focus, hold it to any subject (even using a tripod) attempt finer adjustments. (I should have made a video of it, you would have been entertained just watching that)Ok so before you think me unfair for dropping the rating below 5 stars, (after all I was trying to use it for something it wasn’t intended for) Because it didn’t work for me is not the reason for the lowered rating. It was due to the fact that “This is” an optical device, and a certain amount of care should be exercised to keep the optics clean. There was no protection at all save for the box it was packaged in. The mirror was dusty with fibrous material (assume from the box) and some other marring material, no idea what. It did all clean up with patients, alcohol swabs and time, but I shouldn’t have had to spend that time prior to using the device.Eventually I may get to trying this on a rifle scope, and there, it may work as intended, but for me… na, I can’t endorse it wholly. Maybe if they take more care to keep the glass clean it will help out the next person.
Victor D. Flores H. –
No compraría de nuevo, el diseño es malo , no se puede ajustar rápido, optaría por otra opción electrónica que ya está en mercado. Es malo el diseño.